Skip to content

2000 Toyota Celica Clutch Replacement

If you have a 2000 Toyota Celica, chances are you will eventually need to replace the clutch. This is not a difficult task, but it is one that should be done by a professional. The average cost of a clutch replacement is between $500 and $700, but it can vary depending on the make and model of your car.

If your 2000 Toyota Celica has been slipping or grinding when you shift gears, it’s time to replace the clutch. This is a relatively simple process that can be completed in a few hours with basic tools. Before you begin, make sure you have all the necessary parts and tools.

You’ll need a new clutch kit, which can be purchased at any auto parts store. You’ll also need a few basic hand tools, including a ratchet set and an adjustable wrench. Once you have everything you need, begin by removing the battery and disconnecting the negative terminal.

Next, remove the shifter knob and boot so you can access the shifter assembly. Unscrew the two bolts that hold the shifter assembly in place and remove it from the vehicle. With the shifter assembly removed, you’ll be able to access the clutch release fork and bearing.

Remove these components and then unbolt the pressure plate from the flywheel. Be careful not to damage the flywheel as you remove this part. Now it’s time to install your new clutch kit.

Begin by putting some high-temperature grease on the splines ofthe input shaft .

2000 Toyota Celica Clutch Replacement


What are the Symptoms of a Bad Clutch

If you’re having trouble with your car’s clutch, it may be due to a few different issues. Here are some common symptoms of a bad clutch:

See also  Toyota Rav4 Hybrid System Malfunction
1. The clutch pedal feels “soft” or spongy when you press it.

2. The engine revs but the car doesn’t move, or moves very slowly, when you put it in gear. 3. You hear a grinding noise when you try to engage the clutch. 4. The car lurches forward or jerks when you shift gears.

5. You smell burning oil or rubber when you use the clutch pedal.

How Do You Know When It’S Time to Replace Your Clutch

You know it’s time to replace your clutch when you start to notice that the car is slipping out of gear, especially when going up hills, or when trying to accelerate quickly. The clutch may also feel “spongy” or unresponsive. If you hear grinding noises when shifting gears, that’s also a sign that the clutch needs to be replaced.

What is the Difference between a Stock And Aftermarket Clutch

There are a few key differences between a stock clutch and an aftermarket one. Firstly, aftermarket clutches usually have a much higher torque capacity than stock ones. This means that they can handle more power and will last longer under heavy use.

Secondly, aftermarket clutches often come with adjustable settings so you can fine-tune them to your specific driving style and needs. And finally, aftermarket clutches typically offer better engagement and feel than stock units.

How Much Does It Cost to Replace a Clutch

The average cost to replace a clutch is about $1,200. The job generally takes about four hours to complete, and the price can vary depending on the year, make, and model of your vehicle. The cost of labor will be the biggest expense, followed by the cost of parts.

If you have a manual transmission, the clutch replacement cost will be lower than if you have an automatic transmission.

See also  2008 Toyota Prius Key Fob

Can I Replace My Own Clutch

If you’re looking to save some money by replacing your clutch yourself, there are a few things you should know. First, it’s not a particularly difficult job, but it is time consuming. Second, you’ll need some specialty tools that you may not have access to unless you’re a mechanic or have friends in the business.

Third, while the parts aren’t terribly expensive, they can be tricky to source if you don’t know where to look. Assuming you have the time and access to the necessary tools, let’s get started. The first thing you’ll need to do is remove the old clutch.

This involves removing the transmission (if it’s manual), which can be a bit of a challenge. Once the transmission is out,Removethe pressure plate bolts and then carefully remove the pressure plate and clutch disc. Be careful not to damage anything as you remove them.

Now it’s time to install the new clutch. Start by putting in the new pressure plate and lining up all of the bolts. Then installthe new clutch disc making sure it is properly aligned withthe input shaft splines.


If your Celica is starting to have clutch problems, it may be time for a replacement. This blog post outlines the process of replacing the clutch in a 2000 Toyota Celica. It includes detailed instructions and photos to help make the job easier.

Replacing the clutch is not a difficult task, but it does require some special tools and knowledge. With this guide, you should be able to do it yourself without any problems.

See also  Toyota Sienna Power Folding Mirrors

Leave a Reply

Your email address will not be published. Required fields are marked *