Skip to content

2008 Toyota Corolla Clutch Replacement

If your 2008 Toyota Corolla is having clutch problems, it may be time to replace the clutch. While this is a relatively easy repair for a mechanic, it is not recommended for do-it-yourselfers. Replacing a clutch can be tricky and if not done correctly, can result in further damage to your car.

In addition, you will need special tools to complete the job.

If your 2008 Toyota Corolla is having clutch problems, it may be time to replace the clutch. This is a pretty straightforward process, but there are a few things to keep in mind. First, make sure you get the right parts.

The kit will include a new pressure plate, throw-out bearing, and pilot bearing (if needed). It’s also a good idea to get a new flywheel – even if yours isn’t damaged, it may have developed some wear from the old clutch. Once you have the parts, follow these steps:

1. Remove the battery and disconnect the negative terminal first, then the positive. 2. Jack up the car and remove the wheels on the side you’ll be working on. Make sure the car is securely supported before proceeding.

3. Disconnect the shifter cables from the transmission so you can remove it later without having to detach them from the shifter itself. You’ll find two bolts holding each cable in place – one at the base of the shifter housing, and one where each cable attaches to the transmission itself.

2008 Toyota Corolla Clutch Replacement

Credit: www.mechanexpert.com

How Much is It to Replace the Clutch in a 2008 Toyota Corolla?

If you’re the owner of a 2008 Toyota Corolla, then you may be wondering how much it would cost to replace the clutch. Here’s what you need to know. On average, it will cost between $500 and $700 to replace the clutch in your 2008 Toyota Corolla.

This estimate includes both parts and labor costs. However, keep in mind that the final bill could be higher or lower depending on a number of factors, such as the specific model of Corolla you have and where you take it for service.

See also  Flowmaster Super 10 Vs 40
When it comes time to replace the clutch in your 2008 Toyota Corolla, be sure to find a reputable mechanic who has experience working with this make and model of car.

With proper care and maintenance, your new clutch should last for many years to come!

How Long Does a Toyota Corolla Clutch Last?

A Toyota Corolla clutch can last anywhere from 40,000 to 60,000 miles. However, this varies depending on how the car is driven and maintained. If the car is driven in stop-and-go traffic or used for towing, the clutch will wear out faster.

Conversely, if the car is driven mostly on highways, the clutch will last longer. Proper maintenance is also important for prolonging the life of a clutch. The fluid should be checked regularly and changed when necessary.

The pressure plate and throw-out bearing should also be inspected for wear and replaced if necessary.

Is a Clutch Worth Replacing?

A clutch is a device that helps to engage and disengage the engine from the transmission. It is usually located between the engine and the transmission and consists of two parts: a flywheel and a pressure plate. The flywheel is attached to the crankshaft of the engine and spins along with it.

The pressure plate is mounted on the back of the engine and presses against the flywheel. When you press on the clutch pedal, it releases pressure from the pressure plate, which allows the engine to disconnect from the transmission. This is useful when you need to shift gears or when you’re stopped at a light and want to keep your car from rolling forward or backward.

Over time, clutches can wear out and need to be replaced. Signs that your clutch may need to be replaced include difficulty shifting gears, grinding noises when shifting, or a feeling like the car is slipping out of gear. If you notice any of these problems, it’s best to take your car to a mechanic for an inspection.

See also  Toyota Chr Heated Steering Wheel


Replacing a clutch can be expensive, so it’s important to weigh your options before making a decision. If your car is older, it may not be worth replacing the clutch since it will likely need to be replaced again in the near future. However, if your car is newer or still under warranty, replacing the clutch may be worth it in order to avoid further damage down the road.

How Many Hours of Labor is a Clutch Replacement?

When it comes to clutch replacement, the average labor hours is between 2 to 4 hours. However, this can differ depending on the vehicle and the mechanic. For example, some mechanics may charge by the hour while others may charge a flat fee.

Additionally, the price of parts will also play a role in how much it costs to replace a clutch. On average, parts for a clutch replacement can cost anywhere from $150 to $1,000.

Toyota Corolla Clutch Replacement Removal and Reinstall, Pressure Plate, Throwout Bearing, Rear Main

2009 Toyota Corolla Clutch Replacement

If your 2009 Toyota Corolla is having clutch problems, it may be time for a replacement. This can be a daunting task, but with some patience and elbow grease you can get the job done. Here are some tips on how to replace the clutch in your 2009 Toyota Corolla.

Before getting started, make sure you have all the tools and parts you need. You’ll need a new clutch kit, a jack and jack stands, various wrenches and sockets, and some zip ties. It’s also a good idea to have a helper on hand to assist with the heavy lifting.

Once you have everything gathered, begin by jacking up your Corolla and removing the wheel. Next, disconnect the battery so you don’t accidentally electrocute yourself while working on the car. With the battery disconnected, locate the slave cylinder near the firewall of the engine compartment and remove its line from the master cylinder using a wrench.

See also  1998 Toyota Corolla Mods


With those two lines disconnected, you should now be able to remove the old clutch pedal assembly entirely. Take note of how it was installed so you can put the new one in correctly. Now would also be a good time to inspect other components like the throw out bearing and pilot bushing for wear or damage – if they look worn they should be replaced as well.

Installing the new pedal assembly is simply a reversal of removal – once it’s in place reconnect both hydraulic lines using new washers (included in most clutch kits). Make sure they’re tight so there are no leaks. Now would also be a good time to bleed any air out ofthe system by depressingthe pedal several times until fluid starts coming out at each connection point – this will ensure optimal performance from your new system.

With that taken care of, re-install your wheel and lowerthe car back down offthe jack stands. Reconnectthe batteryand start her up – she should run just likenew!

Conclusion

If your 2008 Toyota Corolla is having clutch problems, you may need to replace the clutch. This can be a difficult and expensive repair, but it is worth it to keep your car running smoothly. Follow these steps to replace the clutch on your 2008 Toyota Corolla.

1. Remove the old clutch. This will require disconnecting the battery, removing the drive shaft, and unbolting the transmission from the engine. You will also need to remove the old pressure plate and flywheel.

2. Install the new clutch. This will involve bolting the new pressure plate and flywheel onto the engine, reconnecting the drive shaft, and reinstalling the transmission. Make sure everything is tight and secure before starting your car.

3. Test drive your car to make sure everything is working properly.

Leave a Reply

Your email address will not be published. Required fields are marked *