Skip to content

2011 Toyota Prius Key Fob

The Toyota Prius is a hybrid electric car that was first introduced in 1997. The Prius was the first mass-produced hybrid car and has since become one of the most popular hybrids on the market. The 2011 Toyota Prius features a key fob that allows the driver to remotely unlock and lock the doors, as well as start and stop the engine.

The key fob also has a Panic button that can be used to sounded the alarm if needed.

If you own a 2011 Toyota Prius, you may have noticed that your key fob is starting to act up. Here are some common problems that can occur with the key fob: 1. The key fob won’t unlock the doors.

This is usually caused by a dead battery. Try replacing the batteries in your key fob and see if that solves the problem. 2. The key fob won’t lock the doors.

Again, this is most likely due to a dead battery. Try replacing the batteries and see if that does the trick. 3. The buttons on the key fob are unresponsive or slow to respond.

This could be caused by dirt or debris build-up on the buttons, or it could be a sign of more serious wear and tear. If cleaning doesn’t improve things, you may need to get a new key fob from Toyota (or wherever you purchased your car).

2011 Toyota Prius Key Fob

Credit: www.keylessshop.com

Q: How Do I Know If My 2011 Toyota Prius Needs a New Key Fob

If you have a 2011 Toyota Prius, you may be wondering if you need a new key fob. Here are a few signs that it might be time to get a new one:

See also  6 4 Powerstroke Problems
1. You can’t find your keys.

This is probably the most obvious sign that you need a new key fob. If you’re constantly misplacing your keys or can never find them when you need them, it’s probably time for a new key fob. 2. Your key fob is damaged.

If your key fob is cracked, scratched, or otherwise damaged, it may not be working properly. A new key fob will ensure that all the buttons work properly and that your car locks and unlocks correctly. 3. The battery is dead.

If your key fob’s battery is dead, it obviously won’t work. You can usually tell if the battery is dead if the button doesn’t light up when you press it or if the car doesn’t respond when you try to lock or unlock it with the key fob. Replacing the battery might fix the problem temporarily, but if this keeps happening, you’ll likely need to get a new key fob altogether.

4. It’s been lost or stolen. If your key fob has been lost or stolen, there’s no way to know if someone else has access to your car and could potentially steal it (or worse).

Q: Where Can I Get a Replacement Key Fob for My 2011 Toyota Prius

If you need a replacement key fob for your 2011 Toyota Prius, you can purchase one from your local Toyota dealership or from an online retailer. Be sure to have your vehicle identification number (VIN) handy when ordering, as you will need it to ensure that you are ordering the correct key fob for your car. You can also find instructions on how to program your new key fob online or in your Prius owner’s manual.

See also  Prius P3190 After Head Gasket Replacement

Q: How Do I Program My New Key Fob for My 2011 Toyota Prius

Assuming you would like a step-by-step guide on how to program your new key fob for your 2011 Toyota Prius: 1. Enter your vehicle and close all doors. Insert the key into the ignition and turn it to the “On” position without starting the engine.

2. Within 5 seconds, press any button on the first remote control unit once. You should hear a beep. If you do not hear a beep, start over from Step 1.

3. Within 20 seconds, press any button on each of up to 4 additional remote control units one time in succession. After each remote is programmed, you will hear a short beep as confirmation (If no additional remotes are to be programmed, skip to Step 6). 4. When programming is completed successfully, you will hear 5 consecutive beeps followed by one long beep indicating that programming mode has been exited automatically (If an error occurs during programming of any individual remote, that particular remote will have to be reprogrammed).

5. Remove the key from the ignition switch and exit the vehicle (the system can now operate with all previously registered remotes)

Conclusion

The 2011 Toyota Prius comes standard with a key fob that allows the driver to remotely lock and unlock the doors as well as open and close the trunk. The key fob also has a panic button that can be used to activate the car’s alarm system.

Leave a Reply

Your email address will not be published. Required fields are marked *