Skip to content

2012 Toyota Corolla Key Programming

Assuming you would like a blog discussing the 2012 Toyota Corolla and how to program its key: The 2012 Toyota Corolla comes with a transponder key, which needs to be programmed in order to start the car. If you’re looking to do this yourself, here’s what you need to know.

First, you’ll need two working keys for the car. If you only have one, you can get a blank key from your local Toyota dealership or locksmith. Once you have your two keys, sit in the driver’s seat and insert the first key into the ignition.

Turn it to the “On” position but don’t start the engine. With the first key still inserted, remove the second key from your pocket and insert it into the ignition next to the first. Now turn both keys to the “On” position at the same time and hold for about five seconds.

You should hear a chime, indicating that the programming process has begun. Start with one key and repeat this step until both keys work.

If you’re in the market for a new car, the 2012 Toyota Corolla should definitely be on your list. This reliable and affordable sedan is perfect for families or anyone who wants a dependable vehicle. And, if you lose your keys, programming a new key is easy with this step-by-step guide.

First, locate the data link connector (DLC) under the driver’s side of the dash. Then, using a jumper wire or paperclip, connect terminals 4 and 13 together. Next, insert your new key into the ignition and turn it to the “On” position.

Finally, press and release the “Lock” button on your remote transmitter three times within five seconds. That’s it! Your new key is now programmed and ready to use.

See also  Toyota Tacoma 4 Low Beeping
2012 Toyota Corolla Key Programming

Credit: www.amazon.com

Q:How Do You Program a 2012 Toyota Corolla Key

A: In order to program a 2012 Toyota Corolla key, you will need to have two working keys. If you only have one working key, you will need to visit a Toyota dealership or locksmith in order to get a duplicate made. Once you have two working keys, follow these steps:

1. Insert the first key into the ignition and turn it to the “On” position without starting the engine. 2. Within five seconds, insert the second key into the ignition and turn it to the “On” position as well. 3. Within 10 seconds of having both keys in the “On” position, depress and release the gas pedal five times consecutively.

4. Turn off both keys and remove them from the ignition within 20 seconds of completing Step 3. Your new 2012 Toyota Corolla key is now programmed!

If You Only Have One Working Key, You Will Need to Tow the Vehicle to a Dealership Or Locksmith for Programming

If your car has a transponder key, you’re in luck. This type of key is relatively easy to program yourself, as long as you have one working key. If not, you’ll need to tow the vehicle to a dealership or locksmith for programming.

Here’s what you’ll need to do: 1. Locate the data link connector (DLC) under the dash near the steering column. It should have 12 volts of power and ground when the ignition is on.

2. Activate the transponder by placing your working key in the ignition and turning it to the “on” position without starting the engine. You should see a flashing light on your dashboard that indicates the system is ready to be programmed.

See also  Headlight System Malfunction
3. Using a paperclip or other small object, press and hold down the recessed button inside the DLC while turning off and then back on the ignition switch quickly three times within five seconds.

You should hear a chirping noise indicating that programming was successful. Start your engine and test out your new key!

Q:How Much Does It Cost to Program a 2012 Toyota Corolla Key

A: It depends on the dealership and the region, but it can cost up to $200 to have a new key programmed for a 2012 Toyota Corolla.

Q:What If I Lose My Only 2012 Toyota Corolla Key

If you lose your only 2012 Toyota Corolla key, you’ll need to get a new one from a Toyota dealership. The process will vary depending on whether or not you have the key code. If you have the key code, the dealership can simply cut a new key for you.

If you don’t have the key code, they’ll need to order a new set of keys from Toyota, which can take several days. In either case, you’ll likely need to tow your car to the dealership since they won’t be able to drive it without a key.

The Cost for This Service Will Be More Expensive Than If You Had Two Working Keys

If you have lost the only key to your car, the cost for a locksmith to come and make a new one will be more expensive than if you had two working keys. This is because making a new key from scratch takes more time and effort than duplicating an existing key. In addition, you may need to purchase a new ignition cylinder or tumbler as well, which can add to the overall cost.

See also  Toyota Rav4 Vent Selector Not Working

Conclusion

If you’re in the market for a new car, the 2012 Toyota Corolla should definitely be on your list. This compact sedan is reliable, efficient, and affordable – perfect for anyone looking for a great all-around vehicle. And if you’re worried about losing your keys, don’t be – the 2012 Corolla comes with standard keyless entry and remote start, so you can keep your keys safe and sound while still getting all the benefits of a modern car.

Leave a Reply

Your email address will not be published. Required fields are marked *