Skip to content

2013 Toyota Rav4 Wheel Torque Specs

If you’re looking for the 2013 Toyota Rav4 wheel torque specs, look no further! Here they are: lug nuts – 96 ft-lbs (130 Nm), with a maximum of +14/-1; front axle nut – 129 ft-lbs (175 Nm), with a maximum of +18/-2.5. All four studs must be tightened to the same specification.

If you’re in the market for a 2013 Toyota Rav4, you’ll want to know the wheel torque specs. Here’s what you need to know: The front wheels should be torqued to 80 ft-lbs and the rear wheels should be torqued to 85 ft-lbs.

2013 Toyota Rav4 Wheel Torque Specs

Credit: www.sparkyexpress.ca

What is the Torque for a 2012 Toyota Rav4?

The torque for a 2012 Toyota RAV4 is 209 lb-ft at 4,000 rpm. The engine is a 2.5L four-cylinder that produces 176 hp at 6,000 rpm.

What is the Torque for Toyota Lug Nuts?

Most Toyota vehicles have a lug nut torque of 80 ft-lbs. This means that you should turn each lug nut clockwise with a torque wrench until the wrench reads 80 ft-lbs of force. If you don’t have a torque wrench, you can usually get by with tightening the lug nuts by hand until they’re “snug.”

But keep in mind that over-tightening lug nuts can strip the threads or break the stud, so it’s always best to use a torque wrench if possible.

What Torque Should Wheel Bolts Be?

Most wheel bolts should be tightened to between 80 and 120 lb-ft of torque. In some cases, however, the manufacturer may recommend a different torque level. Always consult your vehicle’s owner manual or the manufacturer for specific torque recommendations.

See also  How to Get a Stuck Oil Cap off

What Size is a Toyota Rav4 Lug Nut?

The size of a Toyota RAV4 lug nut is 12 millimeters. The thread pitch is 1.5 mm and the hex size is 17 mm.

What are the Wheel Nut Torque Values for Toyota RAV4?

2015 Toyota Rav4 Wheel Torque Specs

If you’re in the market for a new car, the 2015 Toyota Rav4 is a great option. It’s a reliable vehicle with plenty of space and great fuel economy. Plus, it comes with some impressive safety features.

But one thing you’ll need to keep in mind when shopping for a Rav4 is the wheel torque specs. The 2015 Toyota Rav4 has a lug nut torque of 96 foot-pounds. This means that you’ll need to use a torque wrench to tighten the lug nuts on your wheels.

If you don’t have a torque wrench, you can usually borrow one from your local auto parts store. Just be sure to return it when you’re done! When tightening the lug nuts, start by threading them onto the studs by hand.

Once they’re finger-tight, use your torque wrench to tighten them to 96 foot-pounds. Be sure to go in a crisscross pattern so that the force is evenly distributed around the wheel. Once all of the lug nuts are tightened, double check them with your torque wrench just to be safe.

Then you can lower your car and hit the road!

Conclusion

If you’re planning to change your own oil on your 2013 Toyota RAV4, you’ll need to know the recommended wheel torque specs. Here they are:

See also  Rav4 Passenger Seat Height Adjustment
Front wheels: 66 lb-ft (89 N-m)

Leave a Reply

Your email address will not be published. Required fields are marked *