Skip to content

2016 Toyota Corolla Key Fob Programming

If you need to program a new key fob for your 2016 Toyota Corolla, it’s easy to do yourself. All you need is the new key fob and a working key. Follow these steps and you’ll have your new key fob programmed in no time.

If you’re the owner of a 2016 Toyota Corolla, you may be wondering how to program your key fob. Luckily, it’s a pretty simple process that can be done in just a few minutes. Here’s what you need to do:

1. Start by sitting in your car with the doors closed and the engine off. 2. Locate the “Lock” and “Unlock” buttons on your key fob. These are typically located near the top of the fob.

3. Press and hold down both the “Lock” and “Unlock” buttons simultaneously for approximately 20 seconds. After about 20 seconds, you should hear a chirping sound coming from your car’s direction indicators – this means that the key fob programming mode has been activated. 4. Using either button, press and release only the “Lock” or “Unlock” button (do not press both buttons at once).

You should hear another chirp indicating that each button press has been registered successfully by the system. Repeat this step until all desired keys have been programmed into the system – up to 4 keys can be programmed in total.

2016 Toyota Corolla Key Fob Programming

Credit: www.locksmithkeyless.com

How Do I Program My 2016 Toyota Corolla Key Fob

Assuming you would like a step-by-step guide on programming your 2016 Toyota Corolla’s key fob: 1. Start with the key in the “OFF” position. 2. Press and release the “LOCK” button on the first remote.

See also  1991 Toyota Mr2 Engine Swap


3. Within five seconds, press and hold down the “DISARM” button on the second remote until the locks cycle once. At this point, you can release the button. If successful, all doors will lock, then unlock to confirm that it worked.

4a. If successful, move onto Step 5. Otherwise, within 20 seconds of completing Step 2, insert the key into the ignition and turn it to position “II.”

After five seconds have passed in this position, return the key back to position “OFF.” You should now be able to program your remotes successfully. 5. Press and hold down both “LOCK” and “UNLOCK” buttons simultaneously for two seconds on each remote you wish to program.

For each one that you program successfully, there will be a double chirp from your car’s speakers followed by a single chirp after pressing both buttons again for two seconds (confirming that it worked). 6a. If you hear four chirps after trying to program a remote following these instructions – instead of just two – then it means that too many keys are already programmed to your car (the limit is four total).

In order to fix this problem so that you can continue programming new keys/remotes, insert your key into the ignition and turn it forward to position II without starting up the engine first; wait about five seconds; then turn off the ignition completely and remove your key before proceeding with programming additional keys/remotes using Steps 1 through 5 as necessary until finished..

Conclusion

If you’re the owner of a 2016 Toyota Corolla, you may be wondering how to program your key fob. Fortunately, it’s a pretty simple process that can be done in just a few minutes. Here’s a step-by-step guide to programming your Toyota Corolla key fob:

See also  Toyota Genuine Sae 0W-16 Synthetic Motor Oil


1. Start by sitting in the driver’s seat of your vehicle with all doors closed. 2. Put the key fob into the ignition and turn it to the “On” position (but don’t start the engine). 3. Press and release the “Lock” button on your key fob three times.

You should hear a chirping sound to indicate that it’s working properly. 4. Now, press and hold down the “Lock” button for about five seconds until you hear another chirp indicating that the key fob has been programmed successfully. That’s it!

You can now use your key fob to lock and unlock your car doors as well as start the engine remotely.

Leave a Reply

Your email address will not be published. Required fields are marked *