Skip to content

2019 Corolla Digital Speedometer

The 2019 Corolla comes with a digital speedometer that makes it easy to read your speed while driving. This feature is especially useful when driving in unfamiliar territory or in bad weather conditions. The digital speedometer is also a great way to keep track of your fuel economy.

The 2019 Toyota Corolla is one of the most technologically advanced cars on the market. And one of its coolest features is the digital speedometer. This allows you to see your current speed, as well as the posted speed limit, in a clear and concise way.

No more guessing how fast you’re going!

2019 Corolla Digital Speedometer


How Do You Set the Digital Speedometer on a Toyota Corolla?

Assuming you would like a step-by-step guide on how to set the digital speedometer on a Toyota Corolla: 1. Enter the vehicle and sit in the driver’s seat. Make sure that the car is turned off.

2. Locate the “SET” button on your Toyota Corolla’s instrument panel, which is to the left of your steering wheel. The SET button will be located above your odometer reading. 3. Use your thumb or index finger to press and hold down the SET button for three seconds.

The digital speedometer should now say “Set mph” or “Set km/h.” 4. While continuing to hold down the SET button, use your other hand to turn the knob located next to the SET button until you reach either 54 mph or 86 km/h; this is considered as average driving speed limit in most areas around America and Canada respectively. Once you have reached either 54 mph or 86 km/h, release both buttons at same time; your digital speedometer has now been set!

See also  How to Get a Stuck Oil Cap off

How Do You Show the Speed on a 2019 Toyota Corolla?

Assuming you would like to know how to show the speed on the 2019 Toyota Corolla Instrument Cluster display, it is shown in both kilometers per hour (km/h) and miles per hour (mph). The current speed is displayed in large numbers in the center of the cluster. The odometer and trip meter are located below the speedometer.

To change between displaying your current speed in km/h or mph, press and hold the “DISP” button on the right side of the steering wheel until “MPH” or “km/h” appears in the lower right corner of the instrument cluster display.

How Do You Check the Digital Speed on a Toyota Corolla?

Assuming you would like a blog post discussing how to check the digital speed on a Toyota Corolla: “How to Check the Digital Speed on a Toyota Corolla” If you own a Toyota Corolla, you may be wondering how to check the digital speed.

This is actually a fairly easy process and only takes a few minutes. Here’s what you need to do: 1. Start by turning on your Corolla’s ignition.

You should see a small display on the dashboard that says “ign.” 2. Once the ignition is on, press and release the “trip/odometer reset” button until the display shows “trip A.” The trip/odometer reset button is located just below the odometer reading on your dash.

3. Press and hold down the “trip/odometer reset” button for about two seconds until the digital speedometer appears in either kilometers per hour (km/h) or miles per hour (mph). If it doesn’t appear, try again from step 2. 4. That’s it!

You can now let go of the button and check your speed as desired. Just remember to press the button again when you’re done so that your trip information isn’t erased.

See also  What Lug Nuts Do I Need for Aftermarket Wheels
checking your car’s digital speed is quick and easy once you know where everything is located.


Can I Add a Digital Speedometer to My Car?

Yes, you can add a digital speedometer to your car. You will need to purchase a digital speedometer gauge and have it installed by a professional. The cost of the gauge and installation will vary depending on the make and model of your car.

Customize your Toyota speedometer display

How to Display Digital Speedometer on 2019 Corolla

If you own a 2019 Corolla, you may be wondering how to display the digital speedometer. This can be done by accessing the vehicle’s settings menu. Here’s a step-by-step guide on how to do it:

1. Press the “Menu” button on the Corolla’s infotainment system. 2. Select “Settings.” 3. Scroll down and select “Display.”

4. Select “Speedometer.” 5. Choose between “Analog” or “Digital” speedometer display. Assuming you want to switch to the digital display, select that option and exit out of the Settings menu.

You should now see your car’s speed in large, easy-to-read digits on the right side of the instrument cluster!


The 2019 Toyota Corolla comes with a new digital speedometer that is designed to be more user-friendly and informative than the previous analog version. The new speedometer features a large, easy-to-read display that shows your current speed, as well as your average speed over the last 30 seconds. Additionally, the speedometer can also show your current fuel level, estimated range, and outside temperature.

Leave a Reply

Your email address will not be published. Required fields are marked *