Skip to content

How to Remove Oil Filler Cap

If your car is like most, the oil filler cap is located on the top of the engine, near the front. It’s usually a black or silver cap with a picture of an oil can on it. The purpose of the oil filler cap is to keep dirt and debris out of the engine while allowing oil to flow freely into it.

Over time, the oil filler cap can become corroded or otherwise damaged, making it difficult to remove.

How to remove a broken plastic oil filler cap

  • Unscrew the oil filler cap from the engine using a wrench or pliers
  • Pull the oil filler cap off of the engine
  • Clean the area around the oil filler neck with a rag to remove any dirt or debris
  • Insert a funnel into the oil filler neck and pour in the desired amount of oil
  • Replace the oil filler cap and screw it back onto the engine snugly, but do not overtighten it
How to Remove Oil Filler Cap


How Do I Remove the Oil Filler Cap

Assuming you would like tips on how to remove a stuck oil filler cap: If the oil filler cap is stuck, do not force it. This can damage the threads and make it even more difficult to remove.

Instead, try one of these methods: -Soak the cap in penetrating oil for a few hours or overnight. This will help loosen any corrosion or buildup that may be causing the issue.

-Use a rubber band or piece of cloth to get a good grip on the cap, then twist it counterclockwise until it comes off. -Use pliers if neither of the above methods work. Place the jaws of the pliers around the edge of the cap and twist counterclockwise until loose.

See also  Should I Claim Hail Damage on My Car

Why is It Important to Remove the Oil Filler Cap before Adding Oil

Adding oil to your car is an important part of routine maintenance, but did you know that you should remove the oil filler cap before adding oil? Here’s why: When you remove the oil filler cap, it allows air to enter the engine.

This helps to prevent a vacuum from forming in the crankcase when the oil is being added. A vacuum can cause problems with the engine, so it’s best to avoid it. Additionally, removing the oil filler cap helps ensure that you’re adding oil to the right spot.

It can be easy to miss the opening if the cap is still in place, and that could result in damage to your engine. So play it safe and take off the cap before topping off your oil.

What Happens If I Don’T Remove the Oil Filler Cap before Adding Oil

If you don’t remove the oil filler cap before adding oil, the oil will not be able to flow into the engine and will simply pool at the top. This can cause a number of problems, including: – The engine could run dry of oil, leading to serious damage.

– Oil pressure could build up, potentially causing a dangerous leak. – The oil might not be properly distributed throughout the engine, leading to poor lubrication and increased wear and tear. So make sure you always remove the oil filler cap before adding oil!


If your car has an oil filler cap, you may need to remove it to add oil or check the level. Here’s how:

See also  Toyota Celica 2000 Tuning
First, find the oil filler cap.

It’s usually located on the top of the engine, near the front. Next, unscrew the cap by turning it counterclockwise. If it’s stuck, you can use a rag or a pair of pliers to help loosen it.

Once the cap is off, wipe any dirt or grime off of it before putting it back on. To replace the cap, simply screw it on clockwise until it’s tight.

Leave a Reply

Your email address will not be published. Required fields are marked *