Skip to content

License Plate Light Bulb Toyota Corolla

If you drive a Toyota Corolla, then you know that one of the most important things to keep an eye on is your license plate light bulb. This little bulb helps other drivers see your car at night, and it also ensures that you don’t get pulled over for having a dark license plate. Luckily, changing the license plate light bulb in a Toyota Corolla is a pretty easy process.

In this blog post, we’ll show you how to do it in just a few minutes.

Most cars have two license plate light bulbs, but your Toyota Corolla may only have one. If your Corolla is missing a license plate light bulb, you’ll need to replace it as soon as possible. License plate light bulbs are relatively inexpensive and easy to replace.

You can find them at most auto parts stores.

License Plate Light Bulb Toyota Corolla


How Do I Replace the License Plate Light Bulb on My Toyota Corolla

Are you having trouble seeing your license plate at night? If so, it’s probably time to change your Toyota Corolla’s license plate light bulb. Here’s how:

1. Open the trunk of your Toyota Corolla. 2. Locate the two screws that secure the license plate light assembly to the trunk lid. 3. Remove the screws and pull off the assembly.

4. Disconnect the electrical connector from the bulb socket. 5. Remove the old bulb from the socket and insert a new one. Make sure it is seated properly before reconnecting the electrical connector and reassembling the light assembly.


The blog post is about replacing the license plate light bulb on a Toyota Corolla. The author provides step-by-step instructions on how to do this, as well as photos to illustrate the process.

See also  2006 Toyota Prius Hybrid Battery Price
First, you will need to remove the two screws that hold the license plate light assembly in place.

Once these are removed, you can pull the assembly out and access the bulb. To remove the old bulb, simply twist it counterclockwise and pull it out. Then, insert the new bulb into the socket and twist it clockwise until it is tight.

Reinsert the assembly into its rightful place and screw in the two screws to secure it. Finally, test your work by turning on your headlights – the license plate should be illuminated!

Leave a Reply

Your email address will not be published. Required fields are marked *