Skip to content

Metrinch Alternative

I have been a big fan of Metrinch tools for a long time. I have used their ratcheting wrenches, sockets, and other hand tools, and have always been impressed with their quality. Recently, however, I came across an alternative to Metrinch that I think is even better: the GearWrench line of tools from Apex Tool Group.

GearWrench makes a full line of ratcheting wrenches, sockets, and other hand tools that are every bit as good as Metrinch, but at a fraction of the price.


If you’re looking for an alternative to Metrinch, consider the following options. They may not be exact replacements, but they should serve similar purposes. First on the list is the Knipex 87 01 250.

This is a German-made tool that’s very similar in design to the Metrinch. It has a comfortable grip and can handle nuts and bolts up to 1/2″ in size. Next is the Channellock 909CB.

This American-made option has a slightly different design than the Metrinch, but it’s still a great choice for working with nuts and bolts. It can handle sizes up to 9/16″. Finally, there’s the Irwin Tools VISE-GRIP 2078300.

This one has a unique locking mechanism that allows you to adjust the jaws to fit any size nut or bolt between 3/8″ and 1″.

Koken Surface Drive

The Koken Surface Drive is a new type of outboard motor that is designed to be used on the water’s surface. This means that it can be used on boats, kayaks, and other watercraft that do not have an underwater hull. The Koken Surface Drive is powered by a gas-powered engine and has a propeller that is mounted on the back of the motor.

This design makes it much more maneuverable than traditional outboard motors and allows for greater control when operating in tight spaces or in rough waters. The Koken Surface Drive is also significantly quieter than traditional outboard motors, making it ideal for use in areas where noise pollution is a concern.

See also  Check Sonar System Lexus Gx 460

Sockets Sets

Sockets are a type of hardware used to connect two electronic devices, usually a computer and another device such as a printer. They come in various sizes and shapes so that they can be compatible with different types of ports. The most common type of socket is an RJ-45, which is used to connect computers to the Internet.

There are also USB sockets, which are used to connect USB devices such as scanners or digital cameras. A socket set is a collection of variously sized sockets that can be used for different purposes. Socket sets usually come in a case or box so that they can be easily transported from one location to another.

They are often used by technicians who need to work on many different types of equipment. A socket set may also include other tools such as screwdrivers and wrenches.

Metric Socket Sizes

Most people are familiar with standard (SAE) sockets, but not all sockets are created equal. There are also metric sockets, which use a different sizing system. While SAE sizes are based on fractions of an inch, metric sizes are based on millimeters.

This can make metric sockets seem confusing at first, but they’re actually quite simple to understand once you know the basics. The most important thing to know about metric socket sizes is that they’re always listed as two numbers. The first number is the socket’s width, while the second number is its height.

For example, a size 10 socket would be 10mm wide and 14mm tall. That might not seem like much of a difference, but it can make a big difference when you’re trying to fit a socket onto a bolt or other fastener.

See also  Rcd Unavailable on Toyota Camry
Another thing to keep in mind is that metric socket sizes are typically listed in millimeters rather than inches.

This means that you’ll need to convert the size from mm to inches if you want to use it with SAE-sized bolts or other fasteners. To do this, simply divide the mm measurement by 25.4 (there are 25.4mm in an inch). So, for example, a size 10 socket would be approximately 0.3937 inches wide and 0.5118 inches tall when converted from mm to inches .

Finally, it’s worth noting that there is some overlap between SAE and metric sizes . In other words, some bolts or other fasteners will accept either type of socket . However , others will be specific to one type or the other .

Be sure to check your application before assuming that any particular socket will work . Overall , understanding metricsocket sizes isn’t difficult once you know the basics . With a little practice , you’ll be ableto quickly identify the right size for any given job .

Metrinch Alternative


Who Makes Metrinch?

Metrinch is a brand of hand tool that is manufactured by the Apex Tool Group. The company has its headquarters in Maryland, United States, and has manufacturing facilities in China, Taiwan, and Brazil. The Metrinch brand was established in the year 1930.

Apex Tool Group is a leading manufacturer and marketer of hand tools, power tools, and related accessories. The company offers more than 10,000 different products under various brands including Craftsman, Stanley Black & Decker, Wera Tools, Zebra Technologies, among others. Metrinch hand tools are known for their durability and precision.

The tools are used in a variety of industries including automotive, aerospace, electronics assembly, and general maintenance.

See also  Toyota Rav4 Sound Deadening

Where is Metrinch Made?

Metrinch is a brand of hand tools and power tools that are manufactured by the Stanley Black & Decker company. The Metrinch brand is based in the United Kingdom, but the products are manufactured in factories all over the world, including locations in China, Taiwan, and India.

What are Metrinch Spanners?

Metrinch spanners are a type of spanner that is used to tighten or loosen nuts and bolts. They have a variety of different sizes and shapes, which makes them ideal for use in a wide range of applications. Metrinch spanners are made from high-quality materials, which makes them durable and long lasting.


The Metrinch is an alternative to the traditional metric wrench. It is a convenient, all-in-one tool that makes it easy to work in tight spaces. The Metrinch has a unique design that allows you to use it with one hand, and it includes a built-in ratchet so you can easily switch between metric and imperial units.

Leave a Reply

Your email address will not be published. Required fields are marked *