Skip to content

Mkiv Supra Manual Boost Controller Install

Installing a manual boost controller (MBC) on your Mkiv Supra is a relatively simple and inexpensive way to increase the performance of your turbocharged engine. By manually adjusting the amount of boost pressure that is sent to the engine, you can safely increase power and torque without having to make any other modifications. In this article, we will show you how to install an MBC on your Mkiv Supra.

If you own a Mkiv Supra, then you know that the stock boost controller can be a little lacking. Luckily, there are aftermarket options available that can give you much better control over your boost. In this blog post, we’ll show you how to install a manual boost controller on your Mkiv Supra.

The first thing you’ll need to do is remove the stock boost controller. This is located on the firewall, just behind the power steering reservoir. Once it’s removed, you’ll be able to see the two hoses that go to the wastegate actuator.

One of these hoses will have a black plastic T-fitting. This is where you’ll be installing your manual boost controller. Next, take one of the lines from your manual boost controller and attach it to the side of the T-fitting that doesn’t have a hose going to it.

The other line from your manual boost controller will go directly to the wastegate actuator itself. Make sure all of your connections are nice and tight so there are no leaks. Now it’s time to test it out!

Start up your engine and let her rip! With your new manual boost controller installed, you should notice an immediate difference in how much better you can control yourboost pressure. No more worries about hitting those highboost levels that can cause engine damage – now you’re in complete control!

Mkiv Supra Manual Boost Controller Install

Credit: www.mkivsupra.net

What is the Best Manual Boost Controller for the Mkiv Supra

There are a few different ways to go about finding the best manual boost controller for your Mkiv Supra. You could ask around in online forums or do a search on Google, but the best way to find out is by talking to people who have already installed one.

See also  Corolla Hybrid Ev Mode
One of the most popular manual boost controllers for the Mkiv Supra is the Greddy Profec B Spec II.

This controller allows you to adjust the boost level up or down, depending on your needs. It also has a built-in overboost protection system, so you don’t have to worry about damaging your engine if you accidentally turn the boost up too high. Another option is the HKS EVC 5 electronic boost controller.

This unit gives you more precise control over your boost levels, and also features an overboost protection system. If you’re looking for ultimate precision and safety, this is probably the controller for you. No matter which manual boost controller you choose, be sure to get one that’s specifically designed for use with the Mkiv Supra.

That way, you’ll know it will fit properly and work correctly with your car’s engine management system.

How Difficult is It to Install a Manual Boost Controller on the Mkiv Supra

If you’re looking to add a manual boost controller to your Mkiv Supra, you might be wondering just how difficult the process is. While it’s not a particularly complicated install, there are a few things you’ll need to keep in mind during the process. First and foremost, you’ll need to locate the factory boost control solenoid on your vehicle.

This is typically located near the firewall on the driver’s side of the engine bay. Once you’ve found it, disconnect the electrical connector and then remove the two 10mm bolts holding it in place. With the factory solenoid out of the way, it’s time to install your manual boost controller.

Depending on which model you’ve purchased, installation will vary slightly. However, most models will require you to connect one end of the controller to the port where your factory solenoid was previously installed. The other end will then need to be plumbed into your wastegate so that it can properly regulate boost pressure.

See also  Communication Module Activation Failed Toyota Rav4


Once everything is connected properly, simply bolt everything back into place and reconnect your electrical connector. At this point, all that’s left to do is give her a test drive and enjoy those extra ponies underfoot!

Will Installing a Manual Boost Controller Void My Warranty

If you’re looking to improve the performance of your car, one popular modification is installing a manual boost controller. This simple device allows you to manually adjust the amount of boost pressure that your turbocharger produces, giving you more control over how much power your engine makes. But before you start shopping for a boost controller, you might be wondering if this modification will void your car’s warranty.

The answer is maybe. While most aftermarket parts won’t void your warranty outright, they could potentially cause problems if something goes wrong with your car. That’s because when you modify your car, the dealership or manufacturer can argue that the modifications are to blame for any issues that arise.

So if you do install a manual boost controller and something goes wrong with your engine down the road, it could be more difficult (and expensive) to get it repaired under warranty. That said, there are ways to minimize the risk of voiding your warranty when installing aftermarket parts. First, make sure to only use high-quality parts from reputable manufacturers.

Second, have the work done by a professional mechanic or tuning shop so everything is installed correctly and there’s a record of the work being done. Finally, keep all receipts and documentation for any aftermarket parts or services so you can prove what was done in case there’s ever an issue down the road. By following these tips, you can help reduce the risk of voiding your warranty when installing a manual boost controller (or any other aftermarket part).

And while there’s always some risk involved in modifying your car, for many people the benefits outweigh the potential downside. So if you’re looking for a way to improve performance without breaking the bank, installing a manual boost controller is definitely worth considering.

See also  Toyota Auris Catalytic Converter

Conclusion

Assuming you would like a summary of the blog post titled “Mkiv Supra Manual Boost Controller Install”: This blog post details the installation of a manual boost controller (MBC) on a Mkiv Toyota Supra. The author starts by outlining the tools and materials needed for the install, which includes an MBC, T-fitting, 3/8″ vacuum hose, and zip ties.

They then proceed to give step-by-step instructions on how to properly install the MBC. The first step is to find an appropriate location for the MBC. The author suggests mounting it near the firewall on the driver’s side, as this will make it easy to reach and adjust.

Once you have found a spot, use the supplied zip ties to secure the MBC in place. Next, you will need to connect one end of the vacuum hose to the port on the MBC labeled “atmosphere.” The other end of this hose should be connected to a T-fitting.

From there, two more hoses should be ran – one from each open port on the T-fitting – to different locations on your turbocharger’s wastegate actuator rod. It is important that these hoses are routed so that they do not come into contact with any hot surfaces or moving parts. The final step is to adjust your MBC so that it is providing just enough boost pressure to reach your desired level.

To do this, start by turning the knob all the way clockwise until it stops. Then, slowly turn it counterclockwise until you hear hissing from both hoses connected to your turbocharger’s wastegate actuator rod. At this point, you can fine tune the boost pressure by continuing to turn the knob until you reach your desired level.

Leave a Reply

Your email address will not be published. Required fields are marked *