Skip to content

Polish Instrument Cluster Plastic

If you’re like most people, your car is one of your favorite places. You spend a lot of time in it, and it’s a big part of your life. So when something goes wrong with it, it can be a big deal.

One of the things that can go wrong is the instrument cluster plastic. The instrument cluster is the part of the car that has all the gauges and lights that tell you how fast you’re going, how much gas you have, and other important information. The plastic around it can crack or fade over time, making it difficult to read.

If your car’s instrument cluster is looking a little dull, you may be considering polishing the plastic. Here’s a quick guide on how to do just that! You’ll need:

-A can of plastic polish -A clean cloth -A soft bristled brush (optional)

Instructions: 1. Start by giving your instrument cluster a good cleaning with a clean cloth and some soap and water. This will help the polish adhere better and also remove any dirt or grime that could scratch the plastic.

2. Once it’s dry, apply a small amount of polish to your cloth and begin rubbing it into the plastic in circular motions. 3. If you’re using a brush, gently scrub the polish into the surface. Otherwise, continue rubing with the cloth until you’ve covered the entire area.

4. Allow the polish to sit for a few minutes before buffing it off with a clean, dry cloth.

Polish Instrument Cluster Plastic

Credit: www.vwroc.com

Q: What is the Polish Instrument Cluster Plastic

If you’ve ever wondered what that plastic piece is on the back of your car’s instrument cluster, wonder no more! It’s called the Polish Instrument Cluster Plastic, or PICP for short. This plastic piece is used to protect the back of the cluster from scratches and other damage that can occur during assembly.

The PICP also helps to keep dust and other contaminants from getting into the back of the cluster, which can cause problems with electrical components.

See also  Toyota Corolla Fog Light Wiring Diagram

Q: Where Can I Find the Polish Instrument Cluster Plastic

Instrument clusters are located in the center of the dash on most Polish cars. They are made of plastic and house the gauges and warning lights for the vehicle. Many instrument clusters have a cover that can be removed to access the gauges and lights.

Q: How Do I Install the Polish Instrument Cluster Plastic

Installing the Polish Instrument Cluster Plastic is a quick and easy process that anyone can do. The hardest part is removing the old plastic, but with a little patience and a few simple tools, it’s not difficult. Here’s what you’ll need:

-A Phillips head screwdriver -A small flathead screwdriver -A sharp knife or box cutter

-A can of compressed air (optional) -New instrument cluster plastic (available online or at your local automotive store) First, use the Phillips head screwdriver to remove the two screws holding the old plastic in place.

Be careful not to strip the screws, as this will make removal more difficult. Next, use the small flathead screwdriver to pry up one side of the old plastic. You may need to use the knife or box cutter to score along the edge of the plastic before it will come loose.

Continue prying until you can completely remove the old plastic. If there are any adhesive residue left behind, use compressed air to blow it away before proceeding. Now it’s time to install the new plastic.

Simply line it up with the opening in the instrument cluster and press it into place. Once again, start with one side and work your way around until all sides are secure. Replace the two screws you removed earlier and give everything a once over to make sure everything looks good before putting your vehicle back together.

See also  Toyota Alloy Wheel Touch Up Paint


That’s all there is to it!

Conclusion

If you own a car with an older dashboard, you may have noticed that the plastic instrument cluster cover has become yellowed or even cracked over time. This is due to the UV rays from the sun causing the plastic to degrade. While there are some products on the market that claim to restore the original color of your dash, they don’t always work as advertised.

One way to revive your faded instrument cluster is to polish it with a product specifically designed for plastic. There are many brands of plastic polish available, but we recommend using Meguiar’s PlastX Clear Plastic Cleaner & Polish. This product will not only clean your instrument cluster, but it will also protect it from future UV damage.

To use PlastX, simply apply a small amount of polish to a soft cloth and rub it into the surface of the instrument cluster in a circular motion. Once you’ve gone over the entire surface, buff away any excess polish with a clean microfiber cloth. You’ll be amazed at how much better your dashboard looks after just one treatment!

Leave a Reply

Your email address will not be published. Required fields are marked *