Skip to content

Prius Aux Not Working

I have a 2004 Prius and the aux input stopped working. I’ve checked all the fuses and they are fine. I’ve also checked the settings on my phone and it’s set to play through the aux input.

Has anyone else had this problem or know how to fix it?

There are a few things that could be causing your Prius aux not to work. First, check to see if the cord is plugged in all the way. If it is, then unplug it and replug it in.

If that doesn’t work, try plugging it into a different outlet. If none of that works, then there could be an issue with your car’s audio system. You can try resetting it by turning off the car and then turning it back on again.

If none of these solutions work, then you may need to take your car to a dealer or mechanic to have them take a look at it.

Prius Aux Not Working

Credit: www.gtacarkits.com

Why Isn’T My Aux Button Working in My Car?

If your car has an AUX button and it isn’t working, there are a few possible reasons why. The first thing to check is the fuse. If the fuse is blown, then replacing it should fix the problem.

If the fuse looks fine, then the next thing to check is the wiring. If there are any loose or damaged wires, they will need to be repaired or replaced. Finally, if all of the above fails, then it is likely that the AUX button itself is defective and will need to be replaced.

See also  Cost to Rebuild Transmission

Why Did My Auxiliary Cord Stop Working?

If you’ve ever had your aux cord stop working, you know how frustrating it can be. There are a few possible reasons why this could happen. Let’s take a look at a few of the most common causes:

1. The aux cord is loose. This is probably the most common reason why an aux cord stops working. If the aux cord is even slightly loose, it can cause problems with the connection.

Make sure that the aux cord is plugged in tightly at both ends. 2. The audio jack is dirty or damaged. Another common reason for an aux cord to stop working is dirt or damage to the audio jack.

Over time, dust and debris can build up in the jack, causing problems with the connection. If you think this might be the problem, try cleaning out the audio jack with a cotton swab or toothpick. If there’s visible damage to the jack, such as bent pins, you’ll need to replace it.

3 . The wire is damaged . One final possible reason for an aux cord to stop working is damage to the wire itself .

This can happen if the cord gets tangled or kinked .

How Do I Enable My Aux Port?

An AUX port is a small audio input jack that allows you to connect an external device, such as a MP3 player, directly to your car stereo. Most stereos nowadays have an AUX port built in, but if yours doesn’t then you can purchase an adapter that will add one. In order to enable the AUX port on your car stereo, first locate the “AUX” button.

This is usually found on the faceplate of the stereo or on the steering wheel controls. Once you’ve located the button, press and hold it until you hear a beep. This indicates that the AUX function has been enabled and you can now plug in your external device.

See also  Pre Collision System Malfunction

How Do I Use the Aux in My 2010 Prius?

Assuming you would like a blog post discussing how to use the AUX input in a 2010 Toyota Prius: The 2010 Toyota Prius comes equipped with an auxiliary audio jack located on the center console. This is a 3.5mm headphone-style jack that can be used to connect an external audio source, such as an MP3 player or smartphone, to the car’s stereo system.

To use the AUX input, simply plug your device into the jack and select the “AUX” input option on the stereo head unit. You will then be able to control playback of your device through the car’s stereo controls. Keep in mind that you will need to adjust the volume manually on your device, as well as on the car stereo, in order to avoid any distortion or clipping.

How To Fix Any Toyota Prius Tacoma Sienna Camry Corolla Audio Auxiliary AUX Not Working

Disc/Aux Button Not Working

If your disc/aux button isn’t working, there are a few things you can try to fix the issue. First, check to see if the button is physically stuck in one position. If it is, try gently pressing and releasing the button to see if that clears the problem.

If not, you may need to clean the button itself or the contact points on the control panel. Use a cotton swab dipped in rubbing alcohol to wipe away any dirt or debris. You could also try using a can of compressed air to blow out any dust that might be blocking the button from functioning properly.

See also  2020 Toyota Corolla Jack Points


If cleaning doesn’t work, there may be an issue with the wiring connecting the button to the rest of the stereo system. This is something best left to a professional mechanic or audio technician. They will be able to diagnose and repair any problems with your wiring.

Once they’ve fixed the issue, your disc/aux button should start working properly again.

Conclusion

If your Toyota Prius Aux input is not working, there are a few things you can try to fix the problem. First, check to make sure that the Aux input is turned on in the car’s audio system settings. If it is, then the next thing to check is the connections between your phone and the car.

Make sure that the Aux cable is firmly plugged into both the phone and the car, and that there are no loose connections. If everything looks good with the connections, then try restarting your phone. Sometimes this can clear up any software issues that may be causing problems with the Aux input.

Leave a Reply

Your email address will not be published. Required fields are marked *