Skip to content

Supra Headlight Removal

To remove the supra headlight, first disconnect the negative battery terminal to prevent any electrical short. Next, using a flathead screwdriver, pry off the two plastic clips that hold the headlight in place. Be careful not to break the clips.

With the clips removed, pull out the headlight and disconnect the wires from the back. Finally, remove the three screws that hold the headlight lens in place and take off the lens.

SUPRA HEADLIGHT REMOVAL!!!!

If you need to remove your supra headlight, there are a few things you need to know. First, make sure that you have the right tools. You will need a screwdriver and a Phillips head screwdriver.

Next, locate the two screws that hold the headlight in place. These screws are located on the back of the headlight assembly. Using your screwdriver, remove these two screws.

Once they are removed, you can pull the headlight assembly away from the car. Be careful not to damage any other parts of your car when doing this. Finally, disconnect the electrical connector from the back of the headlight assembly and remove it completely from your car.

Supra Headlight Removal

Credit: www.youtube.com

How Do I Remove the Headlight on a Supra

Assuming you have a Mark IV Supra, the process for removing the headlight is as follows: 1. Open the hood and locate the three bolts that secure the headlight assembly to the chassis. 2. Remove the bolts using a socket wrench and then pull the entire assembly forward to release it from the chassis.

3. Disconnect the electrical connector from the back of the headlight assembly by depressing the locking tab and sliding it out of place. 4. Pull out the old light bulb from its socket and insert a new one in its place before reassembling everything in reverse order.

See also  Communication Module Activation Failed Toyota Rav4

Conclusion

If you need to remove the headlights from your Supra, there are a few things you need to know. First, make sure you have the right tools. You’ll need a screwdriver and a ratchet.

Second, locate the screws that hold the headlight in place. There are three screws on each side of the headlight. Once you’ve removed the screws, you can pull the headlight out of its socket.

Finally, unplug the electrical connector from the back of the headlight and put everything back together in reverse order.

Leave a Reply

Your email address will not be published. Required fields are marked *