Skip to content

Toyota Awd System Malfunction

In February of 2014, Toyota issued a recall for 885,000 vehicles in the United States due to a problem with the all-wheel drive system. The recall affected Toyota Highlander and Toyota 4Runner SUVs from the 2004 to 2006 model years. The problem was caused by a software glitch that could cause the all-wheel drive system to malfunction, resulting in loss of traction and increased risk of accidents.

Fortunately, there have been no reports of accidents or injuries related to this problem.

If you have a Toyota with an all-wheel drive system, you may be at risk for a malfunction. In some cases, the system can fail and cause the car to lose power or even stall. This can be extremely dangerous, especially if it happens while you’re driving.

If you suspect that your Toyota’s all-wheel drive system is malfunctioning, take it to a mechanic right away.

Toyota Awd System Malfunction


What is the Toyota Awd System And How Does It Work

Toyota’s AWD system is an electronic, button-operated four-wheel drive system that engages the front and rear driveshafts when needed. It is designed for light duty use and is not intended for off-road driving or to be used in place of dedicated winter tires. The AWD system uses sensors to monitor wheel speed, throttle position, and steering angle input from the driver.

When the sensors detect slippage at any of the wheels, the AWD system sends power to the wheels with the most traction. The beauty of Toyota’s AWD system is its simplicity – there are no levers or switches to fumble with, and it automatically engages when needed. However, because it is a lightweight system designed for on-road use, it does have its limitations.

For example, if you are driving in deep snow or on ice, you will still need to use dedicated winter tires for best results (the same goes for mud). And if you’re planning on doing any serious off-roading, you’ll want a more robust 4×4 setup. But for everyday driving – especially in slippery conditions – Toyota’s AWD system can give you some extra peace of mind.

See also  Obd2 Port Not Working Toyota

Why Would the Toyota Awd System Malfunction

When it comes to all-wheel drive systems, there are a few different ways that they can malfunction. One of the most common problems is when the front and rear axles are not able to engage properly. This can happen for a number of reasons, but usually it is due to a problem with the driveshaft or differential.

Another common problem is when one of the wheels starts to slip while the others are still gripping. This can be caused by anything from uneven tire treads to worn brake pads. If you think that your all-wheel drive system is starting to malfunction, it’s always best to take it into a certified mechanic so they can diagnose and fix the problem.

How Can I Tell If My Toyota Awd System is Malfunctioning

Assuming you are talking about the Toyota AWD system, there are a few ways to tell if it is malfunctioning. One way is to simply listen to the car while it is in motion. If you hear any strange noises coming from the car, this could be an indication that something is wrong with the AWD system.

Another way to tell if there may be something wrong with the AWD system is by observing how the car handles while in motion. If the car seems to be slipping or sliding more than usual, this could also be an indication that something is wrong with the AWD system. Of course, these are just a few potential signs that there could be something wrong with the AWD system.

If you suspect that something may be wrong, it’s always best to take your car into a certified mechanic or dealership for further diagnosis and inspection.

See also  Toyota Yaris Power Steering Fluid

What Should I Do If My Toyota Awd System Malfunctions

If your Toyota AWD system malfunctions, there are a few things you can do to troubleshoot the issue. First, check the fuse box for a blown fuse. If the fuse is blown, replace it with a new one and see if that fixes the issue.

If not, check the wiring harness for any loose or damaged wires. Tighten or replace any damaged wires and see if that fixes the problem. If the system is still not working, take your car to a qualified mechanic or Toyota dealership to have it checked out.


There is a new Toyota recall for a problem with the all-wheel drive system. This can cause the vehicle to lose power and stall while driving. There have been reports of accidents and injuries related to this problem.

Toyota is asking owners to bring their vehicles in for service so that the problem can be fixed.

Leave a Reply

Your email address will not be published. Required fields are marked *