Skip to content

Toyota Cigarette Lighter Wiring

If you’re a Toyota owner, you’ve probably noticed that your car’s cigarette lighter doesn’t work. This is a common problem, and it’s usually caused by a faulty wire. The good news is that it’s easy to fix.

All you need is a new Toyota cigarette lighter wiring harness. This part can be found at most auto parts stores, or online. Once you have the part, simply remove the old wiring harness and replace it with the new one.

It’s really that simple! If your car is still under warranty, you may want to take it to the dealer for repair. However, if your car is out of warranty, this is a great way to save money and do the repair yourself.

If you’re a smoker and you own a Toyota, you may be wondering how to wire your cigarette lighter. Toyota vehicles have a specific wiring diagram for their cigarette lighters, so it’s important to follow that when installing your new one. Here’s a quick guide on how to wire your Toyota cigarette lighter:

1. Locate the power outlet fuse in the fuse box. This is usually located under the hood or in the kick panel near the driver’s side door. 2. Remove the old fuse and replace it with a new one of the same amperage rating.

3. Find the positive battery terminal and attach one end of the red wire to it. Then run the other end of the red wire to where you’ll be attaching your new cigarette lighter socket. 4. Attach the black ground wire to a nearby metal ground point; this can be done by loosening a bolt or screw and wrapping the wire around it before tightening it back down again.

Then run the other end of the black wire to where you’ll be attaching your new socket as well.

See also  Toyota Radio Keeps Rebooting
5 . Once everything is wired up, test your new socket by plugging in a standard 12V DC adapter and seeing if it works correctly!

Toyota Cigarette Lighter Wiring


Which Wire is Positive on a Cigarette Lighter Plug?

Assuming you are talking about a standard 12 volt car cigarette lighter socket, the wire with the flat blade is the ground and the wire with the round pin is positive. When inserting the plug into the socket, the round pin goes in first and then the blade slides in behind it to make contact with the spring loaded tab on the back of the socket which completes the circuit.

What Color is the Ground Wire to Cigarette Lighter?

There is no one definitive answer to this question as the color of the ground wire to a cigarette lighter can vary depending on the make and model of the vehicle. However, some common colors for this type of wire are black, green or white. If you are unsure about what color the ground wire to your specific vehicle’s cigarette lighter is, it is best to consult your car’s owners manual or a professional mechanic.

Can I Wire a Cigarette Lighter Directly to the Battery?

Yes, you can wire a cigarette lighter directly to the battery. However, doing so can pose a fire risk if the wiring is not done properly. It is important to make sure that the wires are of the correct gauge and are properly insulated to prevent them from overheating.

If you are not comfortable wiring the cigarette lighter yourself, it is best to have a professional do it for you.

See also  2004 Rav4 Timing Chain Replacement

How Do You Wire Led Light to Cigarette Lighter?

If you’re looking to add some LED light to your car’s cigarette lighter, there are a few things you’ll need to do. First, find an LED that is designed to work with 12V DC power. Next, use a wire stripper to remove about half an inch of insulation from the end of the LED’s positive lead wire.

Then, do the same thing to the end of the negative lead wire. Now it’s time to connect the wires to the cigarette lighter. The positive lead wire will need to be connected to the metal tab on the side of the socket (this is where the + sign is located).

The negative lead wire will need to be connected to one of the screws that holds the socket in place (this is where the – sign is located). Once everything is connected, screw the socket back into place and test out your new LED light!

Wiring diagram of cigarette lighter,

How to Install Cigarette Lighter Socket in Car

If your car doesn’t have a cigarette lighter socket, you can easily install one yourself. Here’s how: 1. Locate an unused 12-volt power outlet in your car.

If there is none, you can tap into the fuse box for a constant 12-volt power supply. 2. Using a drill, make a hole large enough to accommodate the cigarette lighter socket. Be careful not to damage any wires or other components while drilling.

3. Insert the cigarette lighter socket into the hole and secure it with screws or bolts, if necessary.

See also  How to Block off Exhaust Port on Intake Manifold
4. Connect the positive (+) wire from the socket to the positive terminal on the power outlet or fuse box, and connect the negative (-) wire to ground (metal chassis of car). 5. Test the connection by plugging in a cigarette lighter and turning it on.

The element should heat up and be ready to use.


If your Toyota has a cigarette lighter, it’s there for a reason – to light cigarettes. But, over time, the wiring inside the lighter can become frayed or broken, making it unusable. If this happens, you’ll need to replace the wiring.

Here’s a quick guide on how to do just that.

Leave a Reply

Your email address will not be published. Required fields are marked *