For many Toyota Corolla owners, the back window is an important part of the car. It’s not only a source of light and ventilation, but it also provides a view of the world behind you. Unfortunately, this window can become damaged or cracked over time, making it necessary to replace it.
While this may seem like a daunting task, it’s actually quite simple to do with the help of a few tools and some careful instructions. Here’s how to replace your Toyota Corolla’s back window in just a few easy steps.
If you own a Toyota Corolla, chances are you will eventually need to replace the back window. Whether it’s due to a crack, chip, or just general wear and tear, replacing the back window is not a difficult task. Here are the steps you’ll need to take to get your back window looking good as new:
1) Start by removing the old back window. Use a screwdriver to remove the screws that hold it in place. Be careful not to damage the surrounding area as you remove the screws.
2) Once the screws are removed, gently pull out the old back window. If it’s stubborn, you can use a putty knife to help pry it out. 3) Clean up any remaining adhesive around the opening with alcohol or acetone.
You want to make sure the surface is completely clean before proceeding. 4) Cut your new back window to size using a glass cutter or utility knife. Make sure it’s slightly smaller than the opening so that it will fit snugly in place.
5) Apply adhesive around the perimeter of the opening and carefully place your new back window into position. Press down firmly on all sides to ensure good contact between the adhesive and glass.
What are the Symptoms of a Failing Back Window in a Toyota Corolla
If your back window is failing in your Toyota Corolla, you may notice a decrease in visibility when looking through the rearview mirror. The window may appear foggy or dirty, and you may see condensation on the inside of the glass. In some cases, the back window may crack or shatter completely.
If this happens, it’s important to replace the window as soon as possible to avoid injury.
How Do You Replace the Back Window in a Toyota Corolla
Assuming you mean the rear window and not the back glass:
The process for replacing the rear window in a Toyota Corolla is as follows:
1. Remove the screws that hold the interior panel in place.
These are located at the base of the panel. 2. Carefully remove the panel, taking note of any wires or cables that may be attached to it. 3. Unscrew the retaining nuts that hold the window in place.
You will need a socket wrench to do this. 4. Carefully remove the old window, being careful not to damage the weather stripping around it. 5. Place the new window in position and screw on the retaining nuts, tightening them with a socket wrench until they are snug but not too tight (you don’t want to strip them).
What are Some Common Causes of Back Window Failure in a Toyota Corolla
There are many possible causes for back window failure in a Toyota Corolla. The most common include:
1. Age and wear and tear: Over time, the back window may simply become worn out from opening and closing.
This can cause the window to crack or break. 2. Poor installation: If the back window was not installed properly, it may be more likely to fail. This is especially true if the sealant was not applied correctly or if there are any gaps around the window.
3. Extreme temperatures: Both hot and cold temperatures can put stress on the back window and lead to cracking or breaking. In particularly cold weather, ice can build up on the glass and cause it to break when thawed. 4. Accidents: Back windows are susceptible to breaking in accidents, whether they be car accidents or something else entirely.
A heavy object striking the glass can easily cause it to shatter.
How Can I Prevent My Back Window from Failing
Your back window is one of the most important safety features on your vehicle. It helps protect you and your passengers from wind, rain, and debris. Unfortunately, back windows can fail for a number of reasons.
Here are some tips to help prevent your back window from failing: 1. Check the sealant around your back window regularly. If you notice any cracks or gaps, have them repaired as soon as possible.
2. Avoid slamming or pressing hard against your back window. This can put stress on the glass and cause it to crack or break over time.
Instead, opt for gentle cleaners and a soft cloth or sponge.
How Much Does It Cost to Replace a Back Window in a Toyota Corolla
If you need to replace the back window in your Toyota Corolla, the cost will depend on a few factors. First, the size of the window will affect the price. A larger window will be more expensive than a smaller one.
Second, the type of glass will also play a role in the cost. Tempered glass is typically more expensive than regular glass. Finally, your location can also impact the price.
If you live in an area with a higher cost of living, you can expect to pay more for replacement windows than someone who lives in a less expensive area. On average, it will cost between $200 and $400 to replace the back window in your Toyota Corolla. The exact price will depend on all of the factors mentioned above.
Be sure to get multiple quotes from different companies before making a decision so that you can get the best possible price for your replacement window.
If you’re driving a Toyota Corolla and you have a cracked or broken back window, you’ll need to replace it as soon as possible. Fortunately, this is a pretty easy repair that you can do yourself. Just follow these simple steps and you’ll have your back window replaced in no time.